UV DTF stickers.
Make everyday
yours.

UV DTF stickers are physical, adhesive-backed designs printed with UV-cured ink and transferred to compatible hard surfaces. UV DTF stands for ultraviolet direct to film. You peel the backing, apply the design, rub it down and remove the clear carrier film. The design stays on your item; no heat press is needed.

No. S2 Transfers supplies printed UV DTF stickers ready to apply. You do not need a printer, vinyl cutter or heat press to use them. Apply them by hand to a clean, dry, compatible surface and follow the instructions supplied with your order.

No. UV DTF stickers are for compatible hard surfaces. For shirts, totes and other garments, choose apparel DTF transfers designed to bond to fabric with heat and pressure. UV DTF stickers and heat-applied apparel DTF transfers are different products.

For best results, clean your compatible surface with isopropyl alcohol and let it dry completely. Check that the blank tolerates alcohol. Rub the design through the carrier film, then slowly peel away the backing so the design stays on the clear carrier. Position it carefully, press and rub down every part of the design, then slowly peel away the carrier. If a detail lifts, stop and rub it down again. Follow any product-specific instructions supplied with your order.

Read the UV DTF guide (opens in a new tab)

Treat a UV DTF sticker as a lasting decoration, not a repositionable label. Plan its placement before the adhesive touches the surface. Removal may damage the design or affect the finish underneath, so do not assume it can be moved or removed without residue.

Water resistance depends on the transfer, surface and application. Do not treat water resistance as a dishwasher-safe guarantee. For decorated drinkware, our care recommendation is gentle handwashing; avoid soaking, abrasive scrubbing and picking at the design. Follow the care instructions supplied with your order and your blank.

Use compatible smooth, hard surfaces, such as suitable glass, metal or rigid plastic. Texture, coatings, curves and flexibility can affect adhesion. Check your blank and test an unfamiliar surface before making a batch.

No. UV DTF transfers apply by hand. Follow the UV sticker guide and any instructions supplied with your order. Fabric DTF pressing settings do not apply to UV stickers.

A sticker sheet groups several individual designs that can be separated and positioned on compatible blanks. A cup wrap is arranged as a larger design for a suitable cup. Compare the exact design dimensions with your blank; cup capacity alone does not confirm a fit.

UV DTF stands for ultraviolet direct to film. The name describes a process using UV-curable ink and a film-based transfer system to place a design onto a compatible surface.

No. The clear carrier helps hold the design together while you apply it. Remove the carrier after the design adheres, following the transfer’s instructions. The decoration stays on the item.

Use the waiting period specified for your transfer. Do not assume every film and adhesive uses the same timing. If your instructions do not specify it, ask before washing the decorated item.

Yes. S2 offers custom UV DTF transfers by size and a UV gang sheet builder. Check the relevant product’s file and artwork requirements, and set each design to the size you need for your item.

Not necessarily. Cups with the same capacity can have different shapes and dimensions. Measure the usable height and circumference of your cup and compare them with the product’s artwork dimensions. Allow for taper, curves and any gap you want between the ends of the design.

Follow the care instructions supplied with the transfer and the blank. Hand washing is a cautious choice. Do not assume that a decorated item is dishwasher-safe or microwave-safe unless its specific instructions confirm that use.